Mounting Instruction

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 527070_527071_527072_527073_..._02.11.2021
Make sure to examine the condition and load carrying capacity of the wall before installation.
TIP:
EN
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube
Insert the dowels into the drilled holes.
INSERT DOWELS
Place the mounting rail over the dowels and fasten it to
the wall with two screws using an (electric) screwdriver.
ATTACH THE
MOUNTING RAIL
Now you can attach the absorber to the screws.
Repeat this process for any additional absorbers.
That’s it!
ATTACH ABSORBER
Drill the holes at the markings using the drilling
machine.
DRILL HOLES