Mounting Instruction

SCREWING ABSORBERS
These instructions are for the following product: Print Panel 120
MOUNTING INSTRUCTIONS
EN
Open the package carefully! Inserting sharp objects
into the package can damage the absorber. Avoid
using long, sharp tools for opening the package!
Carefully remove the products from the package
and read the mounting instructions carefully.
Remove the mounting accessories and set them
aside.
UNBOXING
While determining the mounting positions, it helps
to mark the walls using a level and tape measure, in
order to achieve even spacing in relation to corners
and sound sources.
Use the small holes in the mounting rail to mark the
distances of the drilling locations.
DETERMINE THE
MOUNTING POSITION
The following tools are needed for installation:
✓ Cutter ✓ Drilling machine
✓ Level ✓ Drill bits
✓ Pencil ✓ (Electric) Screwdriver
✓ Folding ruler / tape measure
TOOLS
Make sure to use the correct type of dowels for your
mounting surface (drywall, masonry, concrete, etc.).
The following mounting accessories are included for
installation of the absorber:
✓ 1 × mounting rail
✓ 2 × dowel (6 mm)
✓ 2 × screw (3.5 mm × 30 mm)
MOUNTING ACCESSORIES