Specification Sheet

Spray Valve
Gray Grip Handle
(Included)
Pre-Rinse Swivel
B-0107-J
1.07 GPM Low Flow
Hold Down Ring
Hose Washer &
(Pre-Rinse Swivel is Shipped
Unattached to Spray Valve.
5/16" Hex Wrench Must be Used
to Attach Swivel to Hose Before
Installing Spray Valve.)
11 1/2"
292mm
Customer/Wholesaler______________________________
2 Saddleback Cove / P.O. Box 1088
Job Name
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
08/07/15JRM
Contractor_______________________________________
Model Specified_____________________ Quantity______
B-0107-J-SWV
Pre-Rinse Unit Accessory:
Travelers Rest, SC 29690
__________________________Date_________
2
1:3
Gray 1.07 GPM Low Flow Spray Valve w/ Pre-Rinse Swivel
of
1Sheet:
Date:
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: [phone] • www.tsbrass.com
Architect/Engineer_________________________________
Checked:
Drawn: Approved:
KJG
JHB
This Space for Architect/Engineer Approval
Product Compliance:
ASME A112.18.1 / CSA B125.1
NSF 61 - Section 9
NSF 372 (Low Lead Content)
EPAct 2005 (PRSV)
EPA WaterSense (PRSV)
7/8"-20 UN Male Thread
Fits All T&S Pre-Rinse Hoses