Specification Sheet

Socket Section to 053A
Loctite Quick-Disconnect
Nipple
Plug Section to Close
Screw 000729-40 Adapter
onto Hose Barrel
Place a Washer Inside
The 000729-40 Adapter
Adapter
Hose & Washer
Screw 053A Adapter onto
000729-40 Adapter
Existing T&S Flexible
Loctite Quick-Disconnect
Loctite Close Nipple to
002881-40 Grip Handle
1
Model Specified_____________________ Quantity______
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
08/26/16JRM
B-0133-QD-1
Contractor_______________________________________
Customer/Wholesaler______________________________
Travelers Rest, SC 29690
Date:
Quick-Disconnect Adapter Retro-Fit Kit for Existing Pre-Rinse Unit
2 Saddleback Cove / P.O. Box 1088
1:12 of
1Sheet:
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: [phone] • www.tsbrass.com
JHB
Architect/Engineer_________________________________
Checked:
Drawn: Approved:
KJG
This Space for Architect/Engineer Approval
Job Name__________________________Date_________
Product Compliance:
ASME A112.18.1 / CSA B125.1
NSF 61 - Section 9
NSF 372 (Low Lead Content)
Parts Needed QTY
1. 0000729-40 Adapter 1
2. 010476-45 Hose Washer 2
3. 053A Adapter 1
4. AW-5B Quick-Disconnect 1
5. 002535-25 Close Nipple 1
6. 002881-40 Gray Handle 1
Parts Needed QTY
1. 010476-45 Hose Washer 3
2. 146X Coupling 1
3. 053A Adapter 2
4. AW-5B Quick-Disconnect 1
Existing Fisher Flexible
Hose
Re-Use Existing Fisher
Spray Valve & Handle
To Retro-Fit a Fisher Pre-Rinse Unit To Retro-Fit a T&S Pre-Rinse Unit
Insert Washer into Grip
Handle & Re-Install
Existing T&S Spray
Valve
Re-Use Existing T&S
Spray Valve (Sprayer
Not Furnished in This
Kit)
Place Washer into Fisher
Section to 053A Adapter
Loctite Quick-Disconnect
& 053A Adapter Together
Quick-Disconnect Plug Section
Loctite 053A Adapter into
164X Coupling
Screw 053A Adapter into
Spray Handle & Screw Handle
Place Washers into Each
Side of 146X Coupling &
Thread Coupling onto Hose