Specification Sheet

2 5/16"
59mm
4 15/16"
125mm
Swivel to Rigid Lock
Washer (Included)
Notes:
Add-On Faucet is an Addition to Pre-Rinse Units and is Installed in 1.
Outlets of Base Mixing Faucets of Units Before Fitting Riser Pipes.
Lever Handle Controls Water On-Off Thru Nozzle Only. Pressure is 2.
Always "On" in Riser Pipe (Controlled by Base Mixing Faucet).
Place Lock Washer into Base Faucet Outlet & Lubricate O-Ring 3.
Prior to Installing Add-On Faucet
Contractor_______________________________________
__________________________Date_________
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
04/11/14JRM
Model Specified_____________________ Quantity______
B-0155-LNEZ
EasyInstall Add-On Faucet w/ 1/4 Turn Eterna Cartridge & Lever Handle
Travelers Rest, SC 29690
Date:
(Less Nozzle)
Customer/Wholesaler______________________________
2 Saddleback Cove / P.O. Box 1088
2
of
1Sheet:
1:2
Architect/Engineer_________________________________
Checked:
Drawn: Approved:
KJG
JHB
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: [phone] • www.tsbrass.com
This Space for Architect/Engineer Approval
Job Name
Product Compliance:
ASME A112.18.1 / CSA B125.1
NSF 61 - Section 9
NSF 372 (Low Lead Content)
ANSI A117.1 (ADA)
Closed
Swivel Outlet Accepts
Standard T&S Swing
Nozzles
Fully
Open
3 15/16"
100mm
90°
(See Note 3)
Fits T&S EasyInstall
Female Outlet
3/8" NPT
Base Faucets.
Inlet Connection
1/4 Turn Eterna
Cartridge &
Lever Handle
5 1/8"
131mm
3/8" Hex L-Key To Remove
Existing Riser Swivel Piece
(Included)