Specification Sheet

1 7/16"
36mm
3 3/4"
96mm
Push Button Metering Cartridges
w/ Hot & Cold Handles and
Vandal Resistant Screws
Rough-In Requirement:
(2)
1 1/8" [ 29mm] Holes
(Requires 3/32" Hex Key)
Metering Adjustment Screw.
Push Button Assembly to Access
Loosen Vandal Resistant Screw
(Do Not Remove) and Pull Off
1/2" NPSM
Male Inlets w/
Coupling Nuts
102mm
4"
5 13/16"
147mm
89mm
3 1/2"
3/4"
19mm
Maximum
Thickness
B-0199-08-N05
Vandal Resistant 0.5 GPM
Surface
Mounting
Non-Aerated Spray Device
1 7/8"
47mm
2 Saddleback Cove / P.O. Box 1088
Contractor_______________________________________
__________________________Date_________
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
07/25/14
2
B-0831-02VR
4" Centerset Deck Mount Faucet, Push Button Metering Cartridges,
Model Specified_____________________ Quantity______
Vandal Resistant 0.5 GPM Non-Aerated Spray Device & 1/2" NPSM
Travelers Rest, SC 29690
Customer/Wholesaler______________________________
DMH
Male Inlets w/ Coupling Nuts
of
1Sheet:
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: 864-834-3518 • www.tsbrass.com
Date: 1:3
Architect/Engineer_________________________________
Checked:
Drawn: Approved:
KJG
JHB
This Space for Architect/Engineer Approval
Job Name
Product Compliance:
ASME A112.18.1 / CSA B125.1
NSF 61 - Section 9
NSF 372 (Low Lead Content)
ANSI A117.1 (ADA)

Summary of content (2 pages)