Installation Sheet

Faucet Installation

1. Shut off water supply and drain lines. Clean sink surface thoroughly.

2. Place no.6 with no.7 on deck in line with mounting holes.

3. Hand tighten no.18 into no.1. Carefully slide no.18 through center sink hole.

4. Insert no.8 under deck and thread tightly into no.6. Thread no.9 onto no.8 and

tighten fully against underside of countertop.

5. Insert no.4 into no.1 tightly. Slide no.2 and no.3 onto no.4. Thread no.5 onto

no.4. Tighten fully against underside of countertop.

6. Place no.19 into hole in countertop. Thread no.20 onto no.19 and tighten fully

against underside of countertop.

7. Slide no.10 through no.19. Connect no.10 to outlet no.17.

8. Connect water supply lines and check for leaks.

Maintenance:

1. To change no.13, remove no.15 by hand.

2. Insert no.16 into hole of no.14 and loosen set screw of no.14. Remove no.14.

3. Unscrew no.11 by hand and remove.

4. Unscrew no.12 by hand and remove.

5. Remove no.13 and replace with new no.13.

6. Replace no.12, no.11 and no.14 and tighten set screw.

7. Replace no.15.

sink

General Instructions