Spray Valve Installation

ManualsBrandsT and S Brass ManualsShop AllT and S Brass Open Hose Reel with 50' Hose, High Flow Spray Valve, Swivel, and 1/2" NPT Female Inlet

PRE-RINSE SPRAY VALVE

Limited One Year Warranty

(Commercial Applications)

T&S warrants to the original purchaser (other

than for purposes of resale) that such product

is free from defects in material and workman-

ship for a period of one (1) year from the date

of purchase. During this one-year warranty

period, if the product is found to be defective,

T&S shall, at its options, repair and/or replace

it. To obtain warranty service, products must

be returned to…

T&S Brass and Bronze Works, Inc.

Attn: Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC 29690

Shipping, freight, insurance, and other

transportation charges of the product to T&S

and the return of repaired or replaced product

to the purchaser are the responsibility of the

purchaser. Repair and/or replacement shall be

made within a reasonable time after receipt by

T&S of the returned product. This warranty does

not cover Items which have received secondary

ﬁ nishing or have been altered or modiﬁ ed after

purchase, or for defects caused by physical

abuse to or misuse of the product, or shipment

of the products.

Any express warranty not provided herein,

and any remedy for Breach of Contract which

might arise, is hereby excluded and disclaimed.

Any implied warranties of merchantability or

ﬁ tness for a particular purpose are limited in

duration to the warranty period provided on

the product. Under no circumstances shall

T&S be liable for loss of use or any special

consequential costs, expenses or damages.

Some states do not allow limitations on how

long and implied warranty lasts or the exclusion

or limitation of incidental or consequential dam-

ages, so the above limitations or exclusions may

not apply to you. Speciﬁ c rights under this war-

ranty and other rights vary from state to state.

Attention California Residents:

“WARNING: This product contains chemicals

known to the State of California to cause cancer,

and birth defects or other reproductive harm.”

P/N: 098-011027-45 Rev.11

Date: 06-08-16

Drawn: TEH

Checked: DMH 06-13-16

Approved: JHB 06-17-16

Installation and

Maintenance

Instructions

B-0107

B-0107-C

B-0107-J

B-10K

B-10K-C

EB-0107-J

EB-10K

EB-10K-C

EB-10K-J

B-10K-J

UK-0107

UK-10K

EB-0107

EB-0107-C

Español:

Instrucciones de instalación y mantenimiento

Français:

Instructions pour l’installation et la maintenance

Deutsch:

Installations- und Wartungsanleitungen

Italiano:

Istruzioni di installazione e manutenzione

中文:

安装与维护说明

Summary of content (11 pages)

PAGE 1
Limited One Year Warranty (Commercial Applications) T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/or replace it.
PAGE 2
Exploded View 1 2 4 6 3 7 12 8 5 9 25 10 11 24 21 23 22 13 14 15 16 17 18 19 17 20 2
PAGE 3
Grey Part Number Guide PARTS KIT 1,2,3 PARTS FOR ANY GREY T&S SPRAY VALVE 1 2 3 4 5 6 Ring, Hold Down #27 Washer Body, Spray Valve Grey Handle Nut, Handle Screw, Handle 000907-45 010476-45 000065-40 001120-45 003198-45 003199-45 PARTS FOR ANY GREY BONNET ASSEMBLY 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 12 13 14 15 16 17 18 19 20 21 002856-40 009306-20 012915-45 001040-45 000608-25 000974-45 001100-45 000895-45 000753-25 012665-45 Bonnet Assembly Stem Washer, Seat Washer, Bonnet Binding Bonnet Washe
PAGE 4
Blue Part Number Guide PARTS KIT 4,5,6,7 PARTS FOR ANY BLUE T&S SPRAY VALVE 1 2 3 4 5 6 Ring, Hold Down #27 Washer Body, Spray Valve Blue Handle Nut, Handle Screw, Handle 000907-45 010476-45 000065-40 011454-45 003198-45 003199-45 PARTS FOR ANY BLUE BONNET ASSEMBLY 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 12 13 14 15 16 17 18 19 20 21 010594-40 009306-20 010563-45 010565-45 000608-25 000974-45 014615-45 000895-45 000753-25 010573-45 Bonnet Assembly Stem Washer, Seat Washer, Bonnet Bind
PAGE 5
General Instructions 8. For EB-0107/UK-0107 & B-0107 ONLY: To replace no.9, unscrew no.11 and disassemble. Make sure the groove side of no.9 fits over no.8, and no.10 rest on ridge side. See Figure A. To replace worn parts: 1. Shut off water supply and drain lines. For ease of disassembly and reassembly, the handle grip can be removed from no.3. 2. Unscrew no.5 and no.6 to remove no.4. Unscrew and remove no.16 from no.3. 9. To replace no.2, unscrew handle grip from no.3 and replace with new no.2. 3.
PAGE 6
Instrucciones Generales 8. ÚNICAMENTE PARA EB-0107/ UK-0107 y B-0107 : Para reemplazar el n.° 9, destornille el n.° 11 y desarme. Asegúrese de que el lado de la ranura del n.° 9 se ajuste al n.° 8, y que el n.° 10 descanse en el borde. Véase la figura A. 9. Para reemplazar el n.° 2, destornille el mango de la manija del n.° 3 y reemplace con el n.° 2 nuevo. Para reemplazar las piezas desgastadas: 1. Corte el suministro de agua y drene las líneas.
PAGE 7
Instructions Générales 8. POUR LES RÉFÉRENCES EB-0107/UK-0107 & B-0107 UNIQUEMENT : Pour remplacer le No 9, dévissez le No 11 et procédez au démontage. Vérifiez que le côté rainure du No 9 s'adapte sur le No 8, et que le No 10 repose sur le côté de l'arête. Voir la Figure A. 9. Pour remplacer le No 2, dévissez la poignée du No 3 et installez un No 2 neuf. 10. Remontez ; Ouvrez l'arrivée d'eau, recherchez des fuites. Pour remplacer les pièces usées : 1.
PAGE 8
Allgemeine Anleitungen 8. NUR für EB-0107/UK-0107 & B-0107: Um Nr. 9 zu ersetzen, Nr. 11 abschrauben und ausbauen. Sicherstellen, dass Rillenseite von Nr. 9 über Nr. 8 passt und Nr. 10 auf der starren Seite ruht. Siehe Abbildung A. 9. Um Nr. 2 zu ersetzen, Nr. 3 vom Handgriff abschrauben und mit einer neuen Nr. 2 ersetzen. 10. Wieder zusammenbauen, Wasserzufuhr anschalten und auf Leckagen prüfen. Verschleißteile ersetzen: 1. Wasserzufuhr ausschalten und Rohre entleeren.
PAGE 9
Istruzioni Generali 8. SOLO per EB-0107/UK-0107 & B-0107 : Per sostituire il n. 9, svitare il n. 11 e smontare. Accertarsi che il lato scanalato del n. 9 entri nel n. 8, e che il n. 10 sia appoggiato sul lato dorsale. Vedere la Figura A. 9. Per sostituire il n. 2, svitare l’impugnatura dal n. 3 e sostituire con il nuovo n. 2. Per sostituire le parti usurate: 1. Chiudere la fornitura idrica e le linee di drenaggio. Per facilità di smontaggio e rimontaggio, l’impugnatura può essere rimossa dal n. 3. 2.
PAGE 10
一般说明 8. 仅适用于 EB-0107/UK-0107 和 B-0107：要更换编号 9，请拧下编号 11 并拆开。确保编号 9 的凹槽侧适合编号 8，并将编号 10 安放在凸棱侧上。见图A。要更换磨损的零部件： 1. 关闭水源和排水管。为便于拆卸和重新组装，可以从编号3上拆下手柄把手。 2. 拧下编号5和编号6以拆下编号4 。从编号3上拧下编号16。 9. 要更换编号2，请从编号3上拧下手柄把手，然后用新的编号2进行更换。 3. 一只手用钳子夹住编号 20，然后用螺丝刀小心地从编号 16 上拧下编号13。图A 13 20 16 4 10.重新组装；打开水源检查是否漏水。 1 3 手柄把手 8 9 6 5 4. 将编号21涂抹在编号13 的光滑部分。用新的相应零部件更换编号 14、15、17、18 和 19。更换前将编号 21 轻轻涂抹在编号 19 的阀门侧。 11 11.
PAGE 11
RELATED T&S BRASS PRODUCT LINE B-0108 JeTSpray Spray Valve B-0108-C JeTSpray Low Flow Spray Valve T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088, Travelers Rest, SC 29690 Phone: (864) 834-4102 Fax: (864) 834-3518 E-mail: tsbrass@tsbrass.