Manualshelf

Spray Valve Installation

ManualsBrandsT and S Brass ManualsShop AllT and S Brass Open Hose Reel with 15' Hose, High Flow Spray Valve, and Swivel
12345678910
9
General Instructions
B-0108 Spray Face Repair Kits
108HSF-RK -- High Flow Spray Face
108SF-RK -- EPAct 2005 Compliant 1.48 GPM Spray Face
1. Shut off water supply to spray valve.
2. With hand or pliers, use center rib to turn the spray face counter-clockwise and remove
spray face and washer.
3. Place new washer in groove of new spray face.
4. Holding spray face horizontal with washer surface facing up, place spray face into
spray valve and secure by rotating clock-wise until tight. Pliers may be used for this, but
do not over-tighten.
5. Turn water on to spray valve and check for leaks.
B-0108 High Flow
Spray Face (1)
Spray Face Assembly
Washer (1) B-0108 1.48 GPM
Spray Face (1)
Washer (1)
HIGH FLOW REGULAR FLOW