Specification Sheet

4 1/8"
105mm
to Fixture
Cold InletHot Inlet
Mixed Water
Performance Rating:
Minimum Flow Rate: 0.5 GPM
Pressure Drop at Minimum Flow Rate: 0.5 psi
Maximum Pressure: 125 psi
Hot Water Inlet Temperature Range: 120~180
F (49~82 C)
Outlet Temperature Range: 80~120
F (27~49 C)
Outlet Temperature Factory Setting: Approx. 100 F (38 C)
Product Specifications:
Scale:
Model No.
Item No.
T&S BRASS AND BRONZE WORKS, INC.
02/16/15GEF
EC-TMV
Thermostatic Mixing Valve with 1/2" NPSM Male Fittings
Travelers Rest, SC 29690
Date:
1
of
1Sheet:
Travelers Rest, SC: 800-476-4103 • Simi Valley, CA: 800-423-0150 • Fax: [phone] • www.tsbrass.com
JHB
DHL
Approved:
1:2
2 Saddleback Cove / P.O. Box 1088
Checked:
Drawn:
This Space for Architect/Engineer Approval
Job Name
__________________________Date_________
Model Specified_____________________ Quantity______
Customer/Wholesaler______________________________
Contractor_______________________________________
Architect/Engineer_________________________________
Product Compliance:
NSF 61 - Section 9
NSF 372 (Low Lead Content)
ASSE 1070 (TMV)
Integral Check Valves
Built into Hot and Cold Inlets
(3 Places)
1/2" NPSM Male
Check Valve Filter Screens
(Included)
Locking Adjustment Knob Prevents Water from
Exceeding Customer's Maximum Temperature
Set Point.
Valve is Factory Pre-set to Deliver Mixed Water
Temperature of Approximately 100
F (38 C) Max.
4 5/8"
118mm