Other Content

The colour indicator flashes white - what does this mean?
The appliance has detected an issue and may need to be repaired.
The cooking cycle has stopped whilst cooking - why?
If you leave the appliance open between 2 cooking cycles it will turn to safety mode and will
have to be reset.
To ensure the best cooking results, you should not open the appliance for more than 1 minute
during cooking cycles. RESET by unplugging it for 2-3 minutes and restart full cooking cycle.
The colour indicator remains solid white - what does this mean?
You are cooking in Manual Mode. You must monitor and check the food yourself throughout
cooking. Or, select one of the other cooking modes and then OK to start a specific cooking cycle.
The OK indicator is still flashing even though I have put food on the plates and closed the grill -
why?
If your food is under 4 mm thick, it is too thin (like bacon slices), it may not be detected.
This is not a problem simply press the OK key for confirmation for cooking to start.
My grill emits smoke during the preheating phase.
This may be due to improper cleaning of the cooking plates.
We recommend that you pre-wash your cooking plates in the following manner before putting
them in the dishwasher to remove any food residue:
- Soak the plates in hot water and degreasing dish soap for about 30 minutes,
- Scrub both sides of the plate with a sponge or a dish brush, hot water and degreasing dish soap,
- Rinse,
- Put in the dishwasher.