User manual

2
2. Range of use
Submersible dirty water pumps from T.I.P. are highly efficient electrical pumps for discharging clear or dirty water
containing solids up to the maximum size specified in the technical details. These high-quality products with their
convincing performance data were developed for the multiple purposes involved with draining and pumping
liquids from one place to another.
The typical ranges of application of submersible dirty water pumps include: draining of ponds, basins, storage
containers, dirty water and biological pitches as well as emergency draining required following flooding or
inundation.
Submersible dirty water pumps from T.I.P. are suitable for stationary or temporary installations.
This product was developed for private use, i.e. not for industrial applications or for continuous operation.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
When using the unit in a pond, please take the required action to ensure that no inhabitants of the pond will be
sucked in.
The device is not suitable for use in swimming pools or for the supply of drinking water.
The pump is not suited to discharge saltwater, feces, inflammable, etching, explosive or other
hazardous liquids. Please observe the max. temperature of the liquids to be discharged stated
in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.
3. Technical Data
Model
Maxima 300 IX
Mains voltage / frequency
230 V~ / 50 Hz
Nominal performance
700 Watt
Protection type
IP68
Pressure port
47.80 mm (1½“), male
Max. flow rate (Q
max
)
1)
18,000 l/h
Max. pressure
0.8 bar
Max. delivery height (H
max
)
1)
8 m
Max. submersion depth 
7 m
Max. size of the solids being pumped
30 mm
Max. fluid temperature (T
max
)
35° C
Max. cut-in frequency in one hour
30, evenly distributed
Length of connection cable
10 m
Cable type
H07RN-F
Weight (net)
7.0 kg
Min. self-priming level (A)
2)
110 mm
Min. suction level (B)
2)
50 mm
Cut-in level (C)
2)
390 mm
Cut-out level (D)
2)
200 mm
Dimensions (L x D x H)
20 x 17 x 36.5 cm
Item no.
30116
1)
2)
The values were determined with free, unreduced outlet.
The values between brackets refer to the illustrations given at the end of these operating instructions.
4. Scope of delivery
The scope of the delivery of this product includes:
One pump with connection cable, two connection ports, one reducing part, one operating manual.
Please verify that the scope of delivery is complete. Depending on the purpose of the application, additional
accessories may be necessary (please refer to the chapters titled "Installation" and “How to order spare parts“).
If possible, keep the packing until the warranty period has expired. Please dispose of the packing materials in an
environmental-friendly manner.
9