Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 25
3.3.2 Cabling
The following are the guidelines regarding cables used for the T-Mobile High-Speed
Internet Gateway:
• All cables must be approved by the relevant national electrical code.
• The T-Mobile High-Speed Internet Gateway must be used with the cabling
supplied with the equipment.
3.3.3 Protective earth
Earthing and bonding of the T-Mobile High-Speed Internet Gateway must comply
with the requirements of NEC article 250 or local electrical codes.
3.4 ESD safety guidelines
The T-Mobile High-Speed Internet Gateway is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they handle
the T-Mobile High-Speed Internet Gateway.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
3.5 Environmental requirements
The environmental requirements for the T-Mobile High-Speed Internet Gateway are:
• operating temperature (ambient): -5°C to 45°C (23°F to 113°F)
• storage temperature (ambient): -40°C to 70°C (-40°F to 158°F)
• storage temperature (ambient):
• One year: -20 °C to 23 °C (-4 °F to 73 °F)
• Three months: -20 °C to 45°C (-4 °F to 113 °F)
• One month: -20 °C to 60 °C (-4 °F to 1403 °F)
• operating relative humidity: 5% to 85% relative humidity, non-condensing
• short-term relative humidity: 5% to 93% relative humidity, non-condensing
Caution — This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the T-Mobile
High-Speed Internet Gateway.