Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 41
Place the gateway:
• for best user experience, place the T-Mobile High-Speed Internet Gateway where
the 5G signal is strongest.
• for convenience, choose the best location by moving your device using the
internal battery.
• in a location with few Wi-Fi obstructions, ideally close to a window
• close to an AC socket (if not using the internal battery)
• on the side of the room closest to the base station (if known)
• on higher elevation or an upper floor of the home
• away from possible sources of interference, electronic devices, such as printers,
microwave ovens, and so on
• away from metal fixtures, enclosures, cabinets, appliances, blinds, reinforced
concrete, and pipes
• not in a location where radio signals might be weak, such as the basement
5.2 Product Warnings
Follow these guidelines when using the T-Mobile High-Speed Internet Gateway and
its battery:
5.3 Connecting power
Connect the AC cable to the power supply, and then plug the other end of the AC
cable into the electrical outlet.
Danger 1 — Do not attempt to access, manipulate, insert
foreign objects into, re-manufacture or change the device
battery. Improper battery use may result in fire, explosion, or
other hazard.
Danger 2 — Do not immerse or expose the device battery to
water or other liquids. Do not expose it to fire or other explosion
hazards.
Danger 3 — Do not attempt to charge the device outside of the
device itself. Use of an unqualified charger may present a risk
of fire, explosion, leakage, or other hazards.
Warning 1 — If the gateway is dropped, especially on a hard
surface, or in case of suspected damage, contact the T-Mobile
service center for inspection.
Warning 2 — Contact a T-Mobile service center to promptly
dispose of used or ineffective batteries in accordance with local
regulations.