Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
ChapterTitleVariable
50
T-Mobile High-Speed Internet Gateway Operator
Manual
Nokia 3TG-01275-AAAA-TCZZA Issue: DRAFT
5.6.7 Notifications
Notifications can appear at any time during the T-Mobile High-Speed Internet
Gateway operation. The notifications are displayed for five seconds.
Table 6 describes the T-Mobile High-Speed Internet Gateway Notifications:
Table 6 T-Mobile High-Speed Internet Gateway Notifications
MemoryOverload Warning Reset or power cycle the device.
StorageOverload Warning Reset, power cycle or factory reset the device.
HighCPUTemperature Warning Reset or power cycle the device.
LowCPUTemperature Warning Reset or power cycle the device.
ModemCPUOverload Warning Reset or power cycle the device.
ModemMemoryOverload Warning Reset or power cycle the device.
ModemStorageOverload Warning Reset, power cycle, or factory reset the device.
ModemHighCPUTemperature Warning Reset or power cycle the device.
SIPServerRegistrationFailure Warning Contact the operator to resolve registration for voice call.
ModemRFHWFailure Major Contact the operator to replace the device.
UPSBatteryInUse Warning Plug AC cable to UPS or DC cable to the device.
ModemFlashingFailure Warning Do nothing. Automatic recovery.
Alarm Severity Action
(2 of 2)
Notification TMO 5G CPE 2 Acknowledgment
Required?
Action
Successful Device Pairing Yes Yes No No
Wi-Fi SSID Change Yes Yes No
Switch to internal battery Yes No No
Switch to UPS Yes No No Optional
Cellular connection lost Yes Yes No
ETWS primary notification Yes Yes Yes
No USIM inserted Yes Yes Yes Insert the SIM
Successful SW upgrade Yes Yes No Do nothing
Failed SW upgrade Yes Yes No Do nothing
Start antenna sweeping No Yes No
Complete antenna sweeping No Yes No
Interrupted antenna sweeping No Yes Yes
(1 of 2)