Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 53
5.11 Connecting devices for Wi-Fi or a mesh
network
If the T-Mobile High-Speed Internet Gateway is to be used for Wi-Fi, connect devices
that are going to use Wi-Fi for service and communications through the T-Mobile
High-Speed Internet Gateway by using the SSID and Wi-Fi key shown on the
underside of the T-Mobile High-Speed Internet Gateway.
To connect a WiFI device using SSID and password, using your phone, select the
the correct Wi-Fi network name, then enter the SSID and password.
If the T-Mobile High-Speed Internet Gateway is to be used as the access point of a
Mesh Wi-Fi 6 System, see section 4.9.
5.12 Connecting Ethernet LANs
In addition to supporting the Mesh Wi-Fi 6 system on the LAN side, the T-Mobile
High-Speed Internet Gateway also supports connection of up to two Gigabit Ethernet
LAN ports.
Before connecting a Gigabit Ethernet LAN to the T-Mobile High-Speed Internet
Gateway, observe the LCD screen, which displays the CONNECTION screen. Tap
the LCD screen four times to display the DEVICES screen.
You connect a Gigabit Ethernet LAN to the T-Mobile High-Speed Internet Gateway
by connecting the cable from the Ethernet LAN to any of two Gigabit Ethernet LAN
ports on the backside of the T-Mobile High-Speed Internet Gateway.
Figure 17 shows the location of the Gigabit Ethernet LAN ports.