Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
ChapterTitleVariable
58
T-Mobile High-Speed Internet Gateway Operator
Manual
Nokia 3TG-01275-AAAA-TCZZA Issue: DRAFT
Procedure 6 Remove the Battery
1 Turn off the T-Mobile High-Speed Internet Gateway by pressing the power on/off button
located on the side.
2 Remove AC cable from the power supply, and then unplug the other end of the AC cable from
the electrical outlet.
3 Remove the Gigabit Ethernet LAN cables from all of the two Gigabit Ethernet LAN ports
(LAN1 and LAN 2) on the side of the T-Mobile High-Speed Internet Gateway.
4 Turn the T-Mobile High-Speed Internet Gateway upside down so that you can see the base
cover. See Figure 19.
5 Using the Phillips screwdriver (Cross), remove the two screws located on opposite corners
of the bottom cover. See Figure 18.
6 Carefully remove the bottom cover. See Figure 20.
7 Unplug the battery by gently pulling on pull rib, then pull out the battery connectors. See
Figure 21 and 22.
8 STOP. This procedure is complete.
Figure 19 Bottom of T-Mobile High-Speed Internet Gateway
35865