Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
ChapterTitleVariable
72
T-Mobile High-Speed Internet Gateway Operator
Manual
Nokia 3TG-01275-AAAA-TCZZA Issue: DRAFT
Procedure 11 Viewing the Overview screen
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu. The Overview screen
includes:
• Network Overview: illustrates the type and number of connected devices
• Internet Connection: shows the 4G and 5G signal strength (RSRP, SNR, RSRQ)
• Devices: lists the types of devices, which include Mesh Wi-Fi 6 System, Wireless, and
Ethernet
• Gateway Information: lists the name, serial number, hardware version, software version,
and running time for the gateway.
2 STOP. This procedure is complete.
9.4 Logging In to the Web GUI
The Super (access rights) user credentials are required to view and configure the
following procedures:
• Network
• Wi-Fi networks: 2.4 GHz and 5 GHz
• Access Point
• ACS Auto Configuration Server
• System
• Reboot Device
• Factory Reset
• Firmware Upgrade
• Enable Debug Control
Note — You will need to know the IP address of the T-Mobile
High-Speed Internet Gateway along with the user name and
password to perform these procedures. This information is
located on the label located on the bottom of the gateway.