Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
T-Mobile High-Speed Internet Gateway Operator
Manual
ChapterTitleVariable
Issue: DRAFT Nokia 3TG-01275-AAAA-TCZZA 73
Procedure 12 Logging into the web GUI
To log into the T-Mobile High-Speed Internet Gateway using the web GUI:
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2 Click Log In.
The Login screen appears.
3 Using the information from the label on the bottom of the T-Mobile High-Speed Internet
Gateway, enter the Super (access rights) Username and Password.
REVIEW QUESTION: Where does the Operator find the Superadmin credentials??
4 Navigate to one of the following procedures:
• Network
• Wi-Fi networks: 2.4 GHz and 5 GHz (Procedure 21)
• Access Point (Procedure 22)
• ACS Auto Configuration Server (Procedure 23)
• System
• Reboot Device - Web GUI (Procedure 24)
• Factory Reset - Web GUI (Procedure 25)
• Firmware Upgrade (Procedure 26)
• Enable Debug Control (Procedure 27)
5 STOP. This procedure is complete.
9.5 Viewing status information
Use the T-Mobile High-Speed Internet Gateway web GUI to view the following status
and information:
• Data Usage (see Procedure 13)
• SIM (see Procedure 14)
• Cellular Network and Access Point (see Procedure 15)