Operator's Manual
Table Of Contents
- T-Mobile High-Speed Internet Gateway Operator Manual
- 1 Preface
- Table of contents
- List of figures
- List of tables
- 2 ETSI environmental and CRoHS guidelines
- 3 ANSI safety guidelines
- 4 Product description
- 4.1 Product overview
- 4.2 4G/LTE and 5G radio support
- 4.3 4G and 5G band and antenna support
- 4.4 Subscriber Interfaces
- 4.5 Environment
- 4.6 Physical dimensions
- 4.7 Physical interfaces
- 4.8 Typical connection
- 4.9 Mesh Wi-Fi 6 System with the T-Mobile High-Speed Internet Gateway
- 4.10 Management
- 4.11 QR code information
- 4.12 Power
- 4.13 Additional functional and feature information
- 5 Installation
- 5.1 Unpacking the T-Mobile High-Speed Internet Gateway
- 5.2 Product Warnings
- 5.3 Connecting power
- 5.4 Starting up
- 5.5 Downloading the T-Mobile Broadband App
- 5.6 Checking LCD
- 5.7 Connecting to Wi-Fi
- 5.8 Managing the Wi-Fi network
- 5.9 Connecting Accessories (Optional)
- 5.10 Repositioning the T-Mobile High-Speed Internet Gateway
- 5.11 Connecting devices for Wi-Fi or a mesh network
- 5.12 Connecting Ethernet LANs
- 6 Removing battery and SIM card
- 7 Replacing battery and SIM card
- 8 FCC statements and label instructions
- 9 Configuration
- 10 Glossary
- Customer document and product support
ChapterTitleVariable
84
T-Mobile High-Speed Internet Gateway Operator
Manual
Nokia 3TG-01275-AAAA-TCZZA Issue: DRAFT
7 Click Save Changes.
8 STOP. This procedure is complete.
Procedure 22 Viewing and editing the Access Point parameters
Up to two Access Points can connect to the T-Mobile High-Speed Internet Gateway.
Use this procedure to view and edit the Access Point parameters for the T-Mobile High-Speed
Internet Gateway.
1 If you have not done so yet, complete the steps in procedure 10.
The Overview Dashboard screen appears with the web GUI menu.
2 If you have not already logged in, log into the web GUI by completing the steps in
procedure12.
3 Click Network.
Wi-Fi Networks, Access Point, and Auto Configuration Server (ACS) appear in the menu.
4 Click Access Point.
5 View the following parameters: service, authentic mode, IPv4, IPv4 Net mask, IPv6, and
MTU.
6 Click the “...” symbol on the top right corner of each Access Point.
WPA Key Enter the WPA key. TThe WPA Key has a minimum of eight
characters.
Click on the eye icon to view or
hide the WPA key.
Parameter Definition Range/Options/Example
(2 of 2)
Note — There are two Access Points pre-configured for the T-Mobile
High-Speed Internet Gateway: One for Internet and OAM traffic, one for
voice traffic (VoLTE).
• Internet and OAM traffic, which can be edited by a superadmin, but
cannot be deleted.
• Voice Traffic (VoLTE), which can be edited and deleted by the
superadmin user.