Installation Guide

1. Hardware features
OBD Dongle
Performance
Processor
Cortex A5 - 500MHz
RAM
1 Gbytes
NAND Flash
2 Gbytes
Power supply
External power supply range
8-18V
External voltage
measurement
●
Li-pol battery
270mAh
Communication
Modem
4G Cat.4 module (LE910C4-NF)
Modem antenna
Internal
SIM
Micro SIM clot
WLAN
Wifi
WiFi 802.11 a/b/g/n/ac 2.4GHz,5 GHz
Bluetooth
BT 5.0 /BT 2.0
Positioning
GNSS receiver
U-blox M8 (GPS, GLONASS)
GNSS antenna
Internal
Interface & Telematics features
IMU
Accelerometer ±2/4/8/16 G
Gyroscope ±125/245/500/1000/2000 dps
OBD protocols
CAN, KWP2000, VPW, PWM
CAN interface
Single CAN coprocessor
Buttons
1 reset button
Leds
2 bicolor LED
Environmental
Connectors
OBD connector
Operating temperature
-20°C/+50°C with Battery
-20°C/+60°C without battery
Dimensions
With OBD connector: 27x69x51 mm
Without OBD connector: 27x56x51 mm