User manual

T-Mobile G1 User Manual 75 May 27, 2009
Note For some Bluetooth devices, you need to enter a passcode to pair with the Bluetooth device.
You can try “0000” as the passcode. If that does not work, consult the Bluetooth device’s
documentation.
4 The pairing and connection status will appear below the hands-free headset or car kit phone name
in the Bluetooth devices list. When the other Bluetooth stereo/hands-free headset or car kit phone is
connected to your phone, the Bluetooth connected icon will appear in the status bar. You can
now start using the Bluetooth stereo/hands-free headset or car kit phone to make and/or receive
phone calls.
Notes
• Pairing between two Bluetooth devices is a one-time process. Once pairing is created, the
devices can recognize the partnership and exchange information without entering a passcode
again.
• If you pair with a second headset while connected to the first, the first headset will be
disconnected. To switch connection back to the first headset, you must manually select that
headset again in the Bluetooth devices list
To disconnect a Bluetooth stereo/hands-free headset or car kit phone
1 Press
HOME > MENU, and then touch Settings.
2 Touch
Wireless controls > Bluetooth settings.
3 Navigate to the Bluetooth devices section, then touch and hold the connected hands-free headset
or car kit phone.
4 Touch
Disconnect.
Touch
Unpair if you want the phone to erase all pairing information with the hands-free stereo/headset
or car kit phone. You will be prompted to enter the passcode again when you connect to that
Bluetooth device.
The icon represents
that the device is a stereo
Bluetooth headset (A2DP
Bluetooth profile).
You need to use a stereo
Bluetooth headset (A2DP
Bluetooth profile) if you
want to listen to music
through a Bluetooth
headset.
The icon represents that
the device is a mono
Bluetooth headset (Headset
and Handsfree Bluetooth
profiles).