User's Manual

T-Mobile G1 User Manual 40 May 27, 2009
To hold the call
Press
MENU, then touch Hold to hold the call. Touch this button again to resume the call. When you
hold the call, the Hold call icon appears in the status bar.
To mute the microphone during a call
Press
MENU, then touch Mute to turn the microphone on or off. When the microphone is turned off, the
Mute button indicator lights up green and the mute icon appears in the status bar.
Note If you are using the provided wired headset in a call, you can press the button on the wired
headset to mute the microphone. Press the button again to unmute the microphone.
To turn the speakerphone on or off
During a call, press
MENU, then touch Speaker to turn the speakerphone on or off. The Speaker button
indicator lights up green and the speakerphone icon appears in the status bar when the
speakerphone is on.
Warning! To avoid damage to your hearing, do not hold your phone against your ear when the
speakerphone is turned on.
To transfer the call to a Bluetooth headset
When a Bluetooth headset is paired and connected to your phone, you can receive all incoming calls
on the Bluetooth headset for hands-free conversation.
Tip Press MENU, then touch Bluetooth to toggle between the phone speaker and the paired Bluetooth
headset.
Note For more information on how to connect a Bluetooth headset or a Bluetooth car kit to your
phone, refer to “Using Bluetooth” on page 74.
When the Bluetooth headset is disconnected from your phone, do the following to reconnect it and
transfer the current call:
1 Make sure that Bluetooth on your phone and the Bluetooth headset are on. Refer to “Using
Bluetooth” on page 74 for details.
2 During a call, press
HOME > MENU, then touch Settings.
3 Touch
Wireless controls > Bluetooth settings.
4 In the
Bluetooth devices section, touch and hold the name of the Bluetooth headset that you have
previously paired and connected to your phone, then touch
Connect on the options menu. When
connected, the Bluetooth connected icon appears in the status bar. The call is automatically
transferred to the Bluetooth headset.
5 Press the
TALK button to display the current call screen.
6 To transfer the call back to your phone, on the ongoing call screen, press
MENU, then touch
Bluetooth.
To end a call
When a call is in progress, you can do one of the following to hang up:
• Press the
END CALL/POWER button.
• Press
MENU, then touch End call.
• If you are using the provided wired headset, press and hold the button to end the call.