Operation Manual

Getting Connected | 101
Use a Bluetooth device as a modem
You can use a phone that has Bluetooth capabilities as a modem for
your device.
To do so, create a Bluetooth modem connection on your device and
then send information to another device by using Bluetooth. The device
relays the information over the network and then sends back to your
device any information that you had requested over the connection.
Once you create a modem connection to the Bluetooth phone, you can
reuse it whenever you want to use the phone as a modem. Make sure
that your device and the destination device are turned on, Bluetooth is
turned on, and that the devices are within close range.
To configure and use a Bluetooth device as a modem
1. On your device, tap Start > Settings > Connections tab >
Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection.
4. In the Select a modem list, tap Bluetooth.
5. Tap Next.
6. If the device appears in the My Connections list, skip to step 11.
7. If the device does not appear in the My Connections list, tap
New, and follow the remaining steps.
8. Select the device name from the list and tap Next.
9. Enter a passkey and tap Next.
10. Enter the same passkey on the device and tap Finish.
11. In the My Connections list, tap the device and tap Next.
12. Enter the phone number to dial for this connection and tap Next.
13. Enter the required logon information for this connection and tap
Finish.
You can start using this service for the program that uses the Bluetooth
connection, such as Inbox on your device, to send and receive e-mail,
or Internet Explorer to browse the Web.