Operation Manual

196 | Appendix
Problem Solutions
ActiveSync does
not properly
display extended
characters.
In order for ActiveSync 4.2 to properly display extended
characters in some languages, you might need to
change the language that is used for non-Unicode
programs.
To change the language that is used for non-Unicode
programs, perform the following procedure:
1. On your computer, click the Start menu.
2. Click Settings > Control Panel.
3. Click Regional and Language Options.
4. In the Regional and Language Options dialog
window, select the Advanced tab.
5. Choose from the available languages in the
Language for non-Unicode programs list, which
determines the language that ActiveSync 4.2 uses.
Display & Sound
Problem Solutions
Screen freezes or
no response.
Soft reset your device by pressing Reset button with
the Stylus.
My device doesn’t
make any sound.
• Check the Sounds settings by tapping Start >
Settings > Personal tab >Sound & Notifications.
• Check the Volume Control, the speaker may be
muted.
What type of
extension files
can set up for
Alarm tone?
The format is *.wav, and should be located under
\Windows.
My device’s sound
only can be heard
from the headset.
• Make sure the jack is clean and free from foreign
particle.
• Re-insert the headset plug into the Audio Jack and
then unplug it may help sometimes.
• Make sure the headset is supplied with the device.