Operation Manual

64 | Synchronizing Your MDA
To synchronize with a PC via Bluetooth
1. Follow the instructions in ActiveSync Help on the PC for
configuring Bluetooth on your PC to support ActiveSync.
2. On the device, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Make sure that Bluetooth is
turned on at the device and the PC, and that they are within close
range.
4. If this is the first time you have connected to this PC via
Bluetooth, you must first complete the Bluetooth wizard on the
device and set up a Bluetooth partnership between your device
and the PC.
For more information about enabling and configuring Bluetooth, see
Chapter 6.
Note You can also use the Sync Setup Wizard to set up the device to
synchronize remotely with Exchange Server. This wizard is started when
you connect your mobile device to your PC after installing ActiveSync
on the PC.
Tip For ActiveSync issues, please refer to the Troubleshooting section in
Appendix.
4.4 Synchronizing Music, Video and Pictures
If you want to carry your music or other digital media with you along
while you travel, ActiveSync works with Windows Media Player to
synchronize music, video, and pictures with your device.
Other than selecting the Media information type in ActiveSync to
be synchronized, all media synchronization settings must be set in
Windows Media Player. Before media can be synchronized, you must
do the following: