Operation Manual

Managing Your MDA | 87
Warning! Always turn off your device before performing a soft reset or
installing/replacing the battery and SIM card.
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command
button on the device. At the same time, use the stylus to lightly
press the RESET button.
RESET button
Voice Command button
Comm Manager button
2. Keep the Comm Manager button and Voice Command button
pressed, and the following message will appear on the screen:
Press Send to restore factory default,
Other key to quit
3. Release the two buttons, and press the Send button to perform a
hard reset.
Send button