Start Guide

13
Connect via Wi-Fi
1. On your Mobile Hotspot,
remove the battery cover.
2. The default SSID and password
are located on the label beneath
the back cover. Write them down,
you will need them to connect.
3. Replace the battery cover and
then power on your Mobile
Hotspot, if necessary.
4. On your device, open the
application or service you use to
connect to a Wi-Fi network.
5. Select the default SSID for
your Mobile Hotspot.
Note: If you do not see your SSID, turn
your Mobile Hotspot off and back on
again.
6. Enter the default password.
7. Click OK. When you see the Globe
icon on your Mobile Hotspot’s display,
you are connected to the Internet.
Connect via the USB cable
1. Insert the small end of the USB
cable into the charging port
of your Mobile Hotspot.
2. Plug the other end into a USB
port on your computer.