User's Guide

SyncUP PETS User Guide
6
Attach the Tracker to your Pet Collar
1. Attach one of the short ends of a single band to any tab on the collar mount.
2. Place the collar mount (with the attached band) on the top side of your pet's
collar. Pull the unattached end of the band under the collar and attach it to
the tab on the other side of the collar mount.
3. Insert the round tracker into the collar mount.
4. Turn the tracker clockwise until it locks into position. That’s it! You are
ready to go. But if you need to remove the tracker from the mount for
charging, just turn it counter-clockwise.