Congratulations on your purchase of REPLAY BOX, a professional true stereo delay from T-Rex Engineering. Built for players who are serious about stereo, REPLAY BOX combines stereo ins and outs, advanced functions like TAP control and the NOTE DIVIDER, and the processing power it takes to produce legendary T-Rex tone. This user manual provides a quick overview of all REPLAY BOX functions and controls.
Two delays in one With REPLAY BOX, everything starts with the twin INs and OUTs, which give you 3 setup options: mono in/ mono out (using the left INPUT and OUTPUT jacks; mono in/stereo out (using the left INPUT jack and both OUPUTS; and stereo in/out using all 4 jacks. Running in full stereo, REPLAY BOX is really two separate delays in one. The main controls on your REPLAY BOX are as follows. VOLUME sets the unit’s overall volume output, while MIX lets you set the balance of your dry and delayed signals.
Technical Specifications Input Impedance@1KHz Output Impedance@1KHZ Power supply Voltage 9V DC Current Draw @ 9V DC Maximum Input signal Vp/p Battery Type / Battery Life External connectors Controls Higher than 1M Ohm Lower than 1K Ohm Minimum 8,5V DC / Maximum 12,5V DC 110 mA 3Vp/p 9V battery 6F22 / 30 minutes Input Jack (L), Input Jack (R), Output Jack (L) , Output Jack (R), 9V DC jack ON/OFF, Tap, Volume, Mix, Repeat, Tempo, Mode Pedal size incl.
T-Rex Engineering ApS www.t-rex-effects.
