Congratulations on your purchase of CREAMER, the latest high-end boutique reverb pedal from T-Rex Engineering. You’ll notice the second you switch it on that CREAMER was born to serve one master only: the gorgeous allencompassing sound of authentic vintage room, hall or spring generated reverberation. You can’t go wrong with the CREAMER reverb – it sounds brilliant at any setting. But the more you experiment with it, the more you’ll find it will give you in return. Just turn the page to get started.
One box, infinite space When you first switch your CREAMER on, it’s a good idea to start by selecting a REVERB TYPE. Each type (ROOM, SPRING or HALL) gives you a basic starting point for shaping the exact reverb sound you want. ROOM emulates the sound of a small studio, rehearsal space or club, depending on your other settings. SPRING models the spring reverb found in vintage guitar amps. HALL, as the name suggests, recreates the sound of playing in a larger concert hall.
Technical Specifications Input Impedance@1KHz Output Impedance@1KHZ Power supply Voltage 9V DC Higher than 1M Ohm Lower than 1K Ohm Minimum 8,5V DC / Maximum 12,5V DC Current Draw @ 9V DC 70 mA Maximum Input signal Vp/p 4Vp/p Battery Type / Battery Life External connectors Controls 9V battery 6F22 / 30 - 60 minutes Input Jack, Output Jack, 9V DC jack ON/OFF, Reverb, Decay, Tone, Mode Pedal size incl. knobs (W x H x D) 60 x 50 x 115 mm / 2,4 x 2 x 4,5 inch Weight excl.
T-Rex Engineering ApS www.t-rex-effects.
