U SER MA NUA L
CONGRATULATIONS on your purchase of FAT SHUGA, a combination drive boost and reverb pedal that delivers the essence of vintage in one compact box. FAT SHUGA lets you adjust the amount of creamy bite you get. It lets you choose between a classic room reverb and a sweet-sounding hall. And it lets you adjust the amount of reverb you apply. The pedal is easy to set up and use. Just turn the page to get started.
LAY ON THE CREAM... Think of FAT SHUGA as 2 pedals in 1 – a creamy drive boost, and a sweet-sounding reverb. To turn the reverb off, just turn the REVERB knob all the way down.* The boost function is controlled via the ON/OFF footswitch and the CREAM knob. Adjusting the knob gives you more or less cream when you hit the footswitch. That’s it! But do take some time to explore different combinations of settings.
TECHNICAL SPECIFICATIONS Input Impedance@1KHz Output Impedance@1KHZ Higher than 1M Ohm Lower than 1K Ohm Power supply Voltage Minimum 8,5V DC / Maximum 12,5V DC Current Draw @ 9V DC 66 mA Maximum Input signal Vp/p 3Vp/p Battery Type / Battery Life External connectors 9V battery 6F22 / 60 - 120 min. Input Jack, Output Jack, 9V DC jack Controls ON/OFF footswitch, CREAM knob, REVERB mode switch, REVERB knob. Pedal size incl. knobs (W x H x D) 70 x 50 x 115 mm / 2,8 x 2 x 4,5 inch Weight excl.
ISSUED IN VEJLE, 2013 Lars Dahl-Jørgensen Founder Sebastian Jensen Founder T-Rex Engineering ApS www.t-rex-effects.
