ToneBug User manual Distortion
Congratulations on your purchase of ToneBug Distortion, the newest member of our ToneBug series of effect pedals that combine great-sounding T-Rex tone, premium retro design, and affordable pricing. With all the controls you need and nothing you don’t, ToneBug Distortion will give you a rich, warm, tubey-sounding distortion that sounds great on any style of music. No matter how you use it, you can always count on ToneBug Distortion to add the perfect edge to your sound.
4 STEPS TO PERFECT DISTORTION Using your ToneBug Distortion Insert a 9V alkaline battery or connect to an electrical outlet using the T-Rex Fuel Tank power supply (not included). Plug your guitar into the INPUT jack, and run a lead from the OUTPUT jack into your amp. Use the GAIN knob to set the amount of distortion (turn it up for a dirtier sound), and use the TONE knob to “tune” your distortion to just the right timbre. Set the overall volume of your distorted sound with the LEVEL knob.
Technical Specifications T-REX WARRANTY CONDITIONS Input Impedance @ 1KHz Higher than 1 M Ohm Output Impedance @ 1KHz Lower than 1 K Ohm Power supply 9V DC Minimum Power supply Voltage 8V DC Maximum Power supply Voltage 12,5V DC Current Draw @ 9V DC 7 mA Maximum input signal Vp/p 3,2 Vp/p Battery Type 9V battery 6F22 Alkaline Battery Life 12 to 16 Hours External connectors Input Jack.
ISSUED IN VEJLE, 2010 Steen Meldgaard Laursen Managing Director Lars Dahl-Jørgensen Development Director Sebastian Jensen Production Director T-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98 www.t-rex-effects.com, mail: info@t-rex-effects.