ToneBug User manual Booster
CONGRATULATIONS on your purchase of Booster, part of our Tonebug series of effect pedals that combine gorgeous T-Rex tone, cool retro design, and affordable pricing. Booster is the perfect solution for making sure your solos and single-note lines are loud enough – without having to sacrifice tone on your rhythm parts or adjust your amp while you’re on stage. With just a BOOST control and a subtle, tone-shaping SCOOP control, Booster is one of the simplest pedals we make.
ONE-STOMP VOLUME... HOW IT WORKS Using your Booster Your natural tone at any volume 1. Insert a 9V alkaline battery or connect to an electrical outlet using a T-Rex Fuel Tank power supply (not included). 2. Plug your guitar into the INPUT jack, and run a lead from the OUTPUT jack into your amp. 3. Use the BOOST knob to determine how loud you’d like your boosted signal to be (set by comparing with your non-boosted volume).
TECHNICAL SPECIFICATIONS: T-REX WARRANTY CONDITIONS Input Impedance @ 1KHz Higher than 1 M Ohm Output Impedance @ 1KHz Lower than 1 K Ohm Power supply 9V DC Minimum Power supply Voltage 8,5V DC Maximum Power supply Voltage 12,5V DC Current Draw @ 9V DC 25 mA Maximum input signal Vp/p 3,2 Vp/p Battery Type 9V battery 6F22 Alkaline Battery Life 8 to 12 Hours External connectors Input Jack.
ISSUED IN VEJLE 2011 Steen Meldgaard Laursen Managing Director Lars Dahl-Jørgensen Development Director Sebastian Jensen Production Director T-Rex Engineering ApS www.t-rex-effects.
