ToneBug User manual Sensewah
CONGRATULATIONS on your purchase of Sensewah, part of our Tonebug series of effect pedals that combine gorgeous T-Rex tone, cool retro design, and affordable pricing. Sensewah is a great-sounding wah-wah pedal that creates your “wah” effect for you automatically – without your having to operate the pedal while you play. It also offers the rare “yoy” effect, which is puts a weird twist on the traditional wah-wah sound.
READY TO GET FUNKED UP? HOW IT WORKS Using your Sensewah Automated wah-wah 1. Insert a 9V alkaline battery or connect to an electrical outlet using a T-Rex Fuel Tank power supply (not included). Traditional wah-wah pedals work by filtering out all but a narrow band of frequencies. As you press the pedal further down with your foot, you move that band up to higher frequencies. 2. Plug your guitar into the INPUT jack, and run a lead from the OUTPUT jack into your amp. 3.
TECHNICAL SPECIFICATIONS: T-REX WARRANTY CONDITIONS Input Impedance @ 1KHz Higher than 1 M Ohm Output Impedance @ 1KHz Lower than 1 K Ohm Power supply 9V DC Minimum Power supply Voltage 8,5V DC Maximum Power supply Voltage 12,5V DC Current Draw @ 9V DC 75 mA Maximum input signal Vp/p 2,5 Vp/p Battery Type 9V battery 6F22 Alkaline Battery Life 0,5 to 1 Hours External connectors Input Jack.
ISSUED IN VEJLE 2011 Steen Meldgaard Laursen Managing Director Lars Dahl-Jørgensen Development Director Sebastian Jensen Production Director T-Rex Engineering ApS www.t-rex-effects.
