User Manual
READY TO GET FUNKED UP?
Using your Sensewah
1. Insert a 9V alkaline battery or connect to an electrical outlet using
a T-Rex Fuel Tank power supply (not included).
2. Plug your guitar into the INPUT jack, and run a lead from the
OUTPUT jack into your amp.
3. Use the SENSE knob to set how much “wah” you want, and the
RANGE knob to set the frequency width of your “wah”.
4. The WAH WAH/YOY YOY switch lets you go from a traditional wah-
wah to the freaky-sounding yoy-yoy eect. Try it out!
HOW IT WORKS
Automated wah-wah
Traditional wah-wah pedals work by ltering out all but a narrow
band of frequencies. As you press the pedal further down with your
foot, you move that band up to higher frequencies.
With automated wah-wah pedals like your Sensewah, the moving
of the frequency band is controlled not by your foot operating the
pedal, but triggered automatically when you strike the strings.
What’s a yoy-yoy?
The yoy-yoy is similar to the wah-wah eect, except that it moves a
double band of frequencies up and down the frequency range. The
upper band is very high, resulting in the strange “whistling” sound
that characterizes the eect..