Install Instructions
7
Unblocking Procedure:
A red light in the LED indicates the circulator rotor is blocked or sticking. Turn the selector to the position MAX, disconnect
and connect power supply to start the automatic release process. The circulator makes 100 attempts to restart (process lasts
approximately 15 minutes). Every restart is signalled by a short ash of white LED light. If the blocking is not removed through
the automatic release process after 100 attempts to restart, the circulator goes into standby and the LED remains solid red.
Perform the manual unblocking steps described below.
1. Disconnect power supply - the warning light switches off.
2. Close both isolating valves and allow cooling. If there are no shut-off devices, drain the system so that the uid level is
beneath that of the circulator.
3. Loosen 4 motor bolts. Remove motor from casing. Carefully pull the rotor/impeller from the motor.
4. Remove impurities and deposits from the impeller and casing.
5. Reinsert the rotor/impeller into the motor.
6. Set the dial to the MAX position.
7. Connect power supply. Check for impeller rotation.
8. If the circulator still doesn’t run it will need to be replaced.
SPEED TACO GRUNDFOS WILO B & G/XYLEM ARMSTRONG
Minimum
003
006
-
Alpha 15-55 (Low)
-
-
Eco-Vario (Low)
Compass (1)
Medium
007
008
0015 (Low)
0015 (Med)
UP-15-42
UPS-15-58 (Low
UPS-15-58 (Med)
Alpha 15-55 (Med)
Star S-21 (1)
Star S-21 (2)
NRF-25 (1)
NRF-25 (2)
Eco-Vario (Med)
Astro 230 (1)
Astro 230 (2)
Compass (2)
Maximum 0015 (Hi)
UPS-15-58 (Hi)
Alpha 15-55 (Hi)
Star S-21 (3)
NRF-25 (3)
Eco-Vario (Hi)
Astro 230 (3)
Compass (3)
0018e Pump Cross Reference (Fixed Speed Mode):
TACO GRUNDFOS WILO B & G/XYLEM ARMSTRONG
VR1816
0015e3
007e
Alpha 15-55 Stratos Eco Eco-Auto Compass 20-20
0018e Pump Cross Reference (Variable Speed Mode):
198-213 RP Casing O-ring
198-214 RP Wiring plug connector (green)
198-215 RP Terminal box cover (black)
198-217 RP Terminal box cover screws (5 per bag)
0010-025 RP Integral Flow Check (IFC
®
)
007-007 RP Flange gasket set
Replacement Parts List