Brochure
CITY WATER SUPPLY COLD WATER LINE
HOT WATER LINE
Hot
Shut-O
Valve
Shut-O
Valve
The Best Location
is furthest xture
from Hot Water Heater
Optional Additional
Hot-Link® Valve Locations
(2) New 1/2”x1/2”
Taco® supplied ex lines
(female to female)
Use (2) existing 3/8” x 1/2”
female to female ex lines
Hot-Link® includes (2)
plastic wall anchors
& screws
Cold
1/2” 1/2”
Water
Heater
Hot-Link®
Cartridge
Circulator
A Typical Installation
with a Mixing Valve
Cold
Inlet
HOT
COLD
Hot Cold
HOT
COLD
Save Energy, Water and Time!
Link up to instant hot water comfort!
Installation is a snap. Uses existing plumbing.
Typical Hot-Link
®
Schematic
Hot water without the waste!
The Taco Hot-Link® System for domestic hot water recirculation
reduces the time it takes for hot water comfort to reach showers
and faucets by recirculating “cooled” water back to the water heater;
hot water lines remain hot. The Hot-Link® System can save an
average family up to 12,000 gallons per year — water that
normally goes down the drain while waiting for hot water.
How the Hot-Link System works.
A quiet and ecient Hot-Link circulator is installed at the
water heater and a Hot-Link bypass valve is easily installed
at the faucet furthest away from the hot water heater. The
thermal disk technology tells the Hot-Link bypass valve
what to do. No under sink electricity is needed.
Hot-Link System is easy to install.
The Hot-Link System circulator is installed at the water
heater. Simply plug the 6’ power cord into any standard
120V electrical outlet; no electrician required. Everything
needed to install and operate the Hot-Link System is
included in the box. Simply set the Hot-Link circulator
timer to work during peak hours or to work continuously.
Benets of the Hot-Link System.
Saves energy, water and time while providing instant hot
water comfort. What’s more, it’s made by Taco, known
by plumbing professionals as a world leader
in high
quality hydronic
components since 1920.