Product Overview

101-206
Near Boiler Trim Kits
Effective: April 1, 2019 Supersedes: December 21, 2018
Submittal Data Information
Job: Engineer:
Contractor:
Rep:
ITEM NO. MODEL NO.
LIMITED WARRANTY STATEMENT
Taco, Inc. will repair or replace without charge (at
the company’s option) any Taco High Efficiency
circulator or circulator part which is proven defec-
tive under normal use within three (3) years from
the date of manufacture.
In order to obtain service under this warranty, it
is the responsibility of the purchaser to promptly
notify the local Taco stocking distributor or Taco
in writing and promptly deliver the subject product
or part, delivery prepaid, to the stocking distribu-
tor. For assistance on warranty returns, the pur-
chaser may either contact the local Taco stock-
ing distributor or Taco. If the subject product or
part contains no defect as covered in this war-
ranty, the purchaser will be billed for parts and
labor charges in effect at time of factory exami-
nation and repair.
Any Taco product or part not installed or operated
in conformity with Taco instructions or which has
been subject to misuse, misapplication, the addi-
tion of petroleum-based fluids or certain chemi-
cal additives to the systems, or other abuse, will
not be covered by this warranty.
If in doubt as to whether a particular substance
is suitable for use with a Taco product or part, or
for any application restrictions, consult the
applicable Taco instruction sheets or contact
Taco at (401-942-8000).
Taco reserves the right to provide replacement
products and parts which are substantially similar
in design and functionally equivalent to the
defective product or part. Taco reserves the right
to make changes in details of design, construc-
tion, or arrangement of materials of its products
without notification.
TACO OFFERS THIS WARRANTY IN LIEU OF
ALL OTHER EXPRESS WARRANTIES. ANY
WARRANTY IMPLIED BY LAW INCLUDING
WARRANTIES OF MERCHANTABILITY OR
FITNESS IS IN EFFECT ONLY FOR THE DURA-
TION OF THE EXPRESS WARRANTY SET
FORTH IN THE FIRST PARAGRAPH ABOVE.
THE ABOVE WARRANTIES ARE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR
STATUTORY, OR ANY OTHER WARRANTY
OBLIGATION ON THE PART OF TACO.
TACO WILL NOT BE LIABLE FOR ANY SPE-
CIAL, INCIDENTAL, INDIRECT OR CONSE-
QUENTIAL DAMAGES RESULTING FROM THE
USE OF ITS PRODUCTS OR ANY INCIDENTAL
COSTS OF REMOVING OR REPLACING
DEFECTIVE PRODUCTS.
This warranty gives the purchaser specific rights,
and the purchaser may have other rights which
vary from state to state. Some states do not
allow limitations on how long an implied warranty
lasts or on the exclusion of incidental or conse-
quential damages, so these limitations or exclu-
sions may not apply to you.
2019
Features & Benets
Application
The select option is shown
for illustration purposes
Select kit combinations
to suit all preferences
Suitable for use in closed loop
systems with water or up to
50% water/ glycol solution.
Warranty protection
All ttings & connections included
Designed for easy installation
1” & 1¼” sizes available
4½ gallon expansion tank included
Expansion tank ........................5 year
All other pieces ........................1 year
Congurations & Materials of Construction
Premium • ASSE 1081-2014
4900 Series™ Air Separator (1” or 1¼” SWT)
Housing ........................................................... Brass
PALL Rings ....................................................... Stainless Steel
Venting unit components ................................ Stainless Steel, EPDM, Viton,
........................................................................ Brass & Engineered Plastics
3450 Combi Valve (1/2” SWT)
Body ................................................................ Forged Brass
Cartridge Components ..................................... Brass, EPDM, Hi-Tem
p Engineered
........................................................................ Plastics & Stainless Steel
Gaskets ............................................................... EPDM
Dual Shut-o Isolation Valve (1/2” NPT) ....... Forged Brass
Expansion Tank (1/2” NPT) ............................... Cold Rolled Steel, Butyl, Welded Steel, Brass
Fittings & Connections .......................................Brass
- 1 x 4” ½” x ½” NPT Nipple
- 1 x 9” ½” x ½” NPT Nipple
- 1 x ½” x ½” FNPT Coupling
Advanced • ASSE 2012-2009, CSA BC4.3-11
4900 Series™ Air Separator (1” or 1¼” NPT)
Housing ........................................................... Brass
PALL Rings ....................................................... Stainless Steel
Venting unit components ................................ Stainless Steel, EPDM, Viton, Brass
...
..................................................................... & Engineered Plastics
3490 Boiler Feed Valve/Backow Preventer (1/2” SWT)
Body ................................................................ Brass
Internal Components ....................................... Brass, EPDM,
Expansion Tank (1/2” NPT) ................................ Cold Rolled Steel, Butyl, Welded Steel, Brass
Fittings & Connections .......................................Brass
- 2 x 4” ½”x½” NPT Nipple
- 1 x ½” Tee
- 1 x ½” NPT Service Check Valve
- 1 x ½” NPT Service Check Valve
Select • ASSE 2012-2009, CSA BC4.3-11
Air Scoop® (1” or 1¼” NPT) ............................... Cast Iron
400 Hy-Vent®
Body ................................................................ Nickel Plated Brass
Internal Components ....................................... Stainless Steel
, BUNA N, Polypropylene,
........................................................................ Noril, Acetal
3490 Boiler Feed Valve/ Backow
Preventer (1/2” SWT)
Body ................................................................ Brass
Internal Components ....................................... Brass, EPDM,
Expansion Tank (1/2” NPT) ................................ Cold Rolled Steel, Butyl, Welded Steel,Brass
Fittings & Connections ....................................... Brass
- 2x 4” ½”x½” NPT Nipple
- 1x ½” Tee
Model
Name
Size Model Number
Height A
(Inches)
Width B
(Inches)
Shipping
Wt. (Lbs.)
Premium
1” TTK-100C-PRM
25.50 19.00 17.51
1-1/4” TTK-125C-PRM
25.75 19.00 18.49
Advanced
1” TTK-100T-ADV
25.50 17.50 18.40
1-1/4” TTK-125T-ADV
26.60 17.50 18.84
Select
1” TTK-100T-SEL
25.25 17.50 18.70
1-1/4” TTK-125T-SEL
25.50 17.50 18.35
Dimensions for reference purposes only.
The Taco® Near Boiler Trim Kit oers a complete, one-box solution for any
boiler installation. The Premium Kit oers superior micro-bubble air elimination,
easily adjustable pressure setting and system isolation with tank draining
capability. The dependable Advanced Kit oers the same superior air
elimination and is ideal for your everyday home boiler system. The Select Trim
Kit is an easy option that features the same Taco trusted quality & reliability.
B
A