- Tact Audio Owner's Manual Preamplifier RCS 2.2 XP

CAUTIONCAUTION
28
Tact Audio
To move the cursor indicator use the front panel or remote control navigation but-
tons. To select an option press the “
ENTER
” button.
1
Correction preset selection
2
EQ preset selection
3
Master level in dB
4
Correction menu option
5
Parametric EQ menu option
6
Output sampling frequency indicator
7
Input sampling frequency indicator
8
RCS 2.2 XP operating mode
9
Master level in dB
10
Mono mode indicator.
Correction preset selection
To select one of the nine correction presets or to bypass them use the “
LEFT” or
“RIGHT” navigation buttons to position the cursor over CR (1). Once the cursor
is positioned over CR (1) press the “ENTER” button. The system will then display
a pull down list containing all presets. Use the “UP” and “DOWN” navigation but-
tons to point to the desired correction preset and then press the “ENTER” button.
This action will engage the selected preset and will display the new selection in
the CR box (1). Once the cursor is positioned over CR (1) you can also select a
correction preset by pressing one of the ten buttons located in the block labeled
“CORRECTION” on the remote control. The 2.2 XP will display a <
*
> next to the
selected presed indicating that the preset was loaded.
EQ preset selection
To select one of sixteen parametric EQ presets or to bypass them use the
“LEFT” or “RIGHT” navigation buttons to position the cursor over EQ (2). Once
the cursor is positioned over EQ (2) press the “ENTER” button. The system will
then display a pull down list containing all presets. Use the “UP” and “DOWN”
navigation buttons to point to the desired EQ preset and then press the “EN-
TER” button. This action will engage the selected preset and will display the new
selection in the EQ box (2). Once the cursor is positioned over EQ (2) you can
also select a correction preset by pressing one of the ten buttons located in the
block labeled “CORRECTION” on the remote control. The 2.2 XP will display a
The main screen is displayed when the RCS 2.2 XP is powered on.
FRONT PANEL DISPLAY
Note: with the remote control you can only select the fi rst nine presets. To
select the rest you must use front panel controls.