- Tact Audio Owner's Manual Preamplifier RCS 2.2 XP

CAUTIONCAUTION
36
Tact Audio
Front Panel
> Main Menu
COMM menu
Use this screen to set the 2.2 XP device address.
This menu has only one option,
A
ddress
.
Address can be set to a
ny number
between 1 and 255. This parameter is used by PC programs to identify the
2.2 XP. This featur
e allows for multiple Tact units to be controlled by the same
RS232 link. The RS232 speed is set to 57.6 Kb.
To change the system device address highlight the “
Address
” option and then
using the “
LEFT
” and “
RIGHT
” navigational buttons select the desired system
address. The RCS 2.2X is shipped with the default address set at 1.
NOTE: If you change the device address make sure that you select the ap-
propriate device address in the RCS 2.2X Room Correction software.