Quick Start Guide

WWW.TACTACAM.COM
REFORMATTING YOUR CARD
GETTING TO KNOW YOUR TACTACAM
Always use the recommended SD Card for your camera. Tactacam 5.0 requires UHS
Speed Class 3 (U3) to deliver the necessary write speed for cameras like the 5.0 that
can shoot 4K and high-bitrate video. U3-certied SD cards must be able to maintain a
minimum write speed of 30MB/s to ensure that recording continues smoothly without
any dropped frames. You can use up to a 128GB card with the 5.0 Tactacam only.
Tactacam 4.0 and Solo WiFi
cameras requires a class 10 or
U1, 32 or 64 GB micro SD Card.
Note: You should always format
your SD Card before using it in
your Tactacam for the rst time or
after it has been used in any other
device. Only use high quality
micro SD Cards. Tactacam SD
Cards, Lexar, or SanDisk Ultra
Extreme are recommended.
Please see more info on SD Cards at tactacam.com/support
Use one of the following methods to access videos located on your micro SD Card.
1. Using the provided USB cord connect your Tactacam to your computer.
Power on your camera to allow the computer and camera to communicate. You will
see an icon on your computer desktop (usually named TACTACAM). Open it, any
videos taken with your Tactacam will be in the “Video” folder.
2. Remove your micro SD Card from your Tactacam and insert the micro SD
Card into the provided micro SD Card adapter. Insert the micro SD Card adapter
into your SD Card reader on your computer.