Quick Start Guide

WWW.TACTACAM.COM
CONNECTING TO THE TACTACAM APP
GETTING TO KNOW YOUR TACTACAM:
Wi-Fi
Note: Your camera functions can only be controlled by your phone when
your are connected to Wi-Fi. This setting lets you connect your camera to
the Tactacam App for mobile remote connection. When wireless is on, a blue
LED appear by the wireless status icon just in front of the rec/power button.
The blue wireless LED will blink when not connected for 1 min then power
itself off. Once connected the blue LED will go solid. The Wi-Fi will remain on
throughout the lifetime of the battery.
1. Downloading the Tactacam App:
Download and open the Tactacam APP from your App store on your
Phone or Tablet. Follow the App’s on-screen instructions.
2. Connect to your Tactacam
To turn on your Tactacam Wi-Fi: While your Tactacam is in pause mode
push and hold the Mode Button for 3 seconds. (Solo WiFi hold the Power
Record Button for 3 seconds.) You will see the blue LED indicator light turn
on and start blinking.
3. From your mobile device’s Wi-Fi setting select the Tactacam Wi-Fi
network. (There is no default password for your Tactacam Wi-Fi.) When
connected, the blinking blue LED lightt will become solid blue.