User's Manual

IMPORTANT:
1.) If computer interface is not COM 1, you must select the
correct Com port as described in the instruction.
2.) The transmitter must be ON and powered in order to program
it.
3.) Turn OFF the transmitter when finished programming.
OPERATING NOTES:
1.) Antenna should always be kept vertical for best operation of
the transmitter.
2.) PLEASE always use fresh batteries at the beginning of each
operation.
3.) Check operation of transmitter portion of Joey with a
receiver prior to any field ops.
4.) Practice with this piece of equipment prior to use.
readily identified.
All this information is stored as part of the Geonautics' Audio
Image (*.img) file and can be easily reconverted to a WAV file for
listening. At the time of conversion a text file containing an
integrity analysis of the download is created as a (*.txt) file.
Verifying the IMG File
To verify a previously downloaded IMG file press the "Browse"
button and set the file type to "Raw Image". Select the file to be
reprocessed. A new WAV and TXT report file will be created. The
TXT file contains the summary of possible data discrepancies.
Whisper Player Command Summary
Help - Whisper Help Display this help file
Help - Version Joey hardware version information
Help - About Whisper software version / copyright
information
Path - Download Directory Set the current directory where files will be
stored
Path-Reset Directory Files are stored in the current directory
Download Download any selected recordings
Browse Load a WAV file for playback or an IMG file
for reprocessing
Record Start/Stop a new recording
Format Erase the complete flash memory inside Joey
List List the Joey's current recordings
Sample Rate Set / display current sample rate
Quantisation Set / display current quantisation format
Serial Port Set / display the computers serial port
Done Exits the program