Extra Information

Shimano

12 cutouts on inside

11 speed (11 sprockets)

1. Place EDCO spacer 0,5mm (T2805.09)

2. Place cassette on the body, sprocket by sprocket

Align deviant lip with text ‘Campa place here’

11 speed (11 sprockets)

1. Don’t use any spacer

2. Place cassette on the body, sprocket by sprocket

Align wide lip with ‘Shim Place here’

9 & 10 speed (9 or 10 sprockets)

1. Place spacers

a. No pocket, use EDCO spacer 2mm (T2805.10)

b. With pocket, use Shimano original spacer 1mm

& EDCO spacer 2mm (T2805.10)

2. Place cassette on the body, sprocket by sprocket

Align wide lip with ‘Shim Place here’

2 mm

10 Speed only

‘Shim place here’

9 & 10 speed (9 or 10 sprockets)

1. Don’t use any spacer

2. Place cassette on the body, sprocket by sprocket

Align campa marker with ‘Campa place here’

Elaboration on step 2

marker =

wide lip

SRAM

9 cutouts on inside

Campagnolo

4 cutouts on inside

0,5 mm

11 Speed only

‘Campa place here’

marker =

deviant lip

Additional instructions

Assembling NEO Smart

Installing the cassette

no marker

PAGE 1
Additional instructions Elaboration on step 2 Assembling NEO Smart marker = wide lip Shimano 12 cutouts on inside & no marker SRAM 9 cutouts on inside 9 & 10 speed (9 or 10 sprockets) 1. 2. Place spacers a. No pocket, use EDCO spacer 2mm (T2805.10) b. With pocket, use Shimano original spacer 1mm & EDCO spacer 2mm (T2805.10) Place cassette on the body, sprocket by sprocket Align wide lip with ‘Shim Place here’ 2 mm 10 Speed only 11 speed (11 sprockets) 1. 2.
PAGE 2
How to install your cassette 1. Unfold the right leg, keep left leg folded and place the trainer on a table with the body facing upward. 2. Place the cassette. See backside of this leaflet for assemble instructions of different cassettes. 3. Place lockring. Count the amount of teeth on the outside of the cassette, of the smallest (last) sprocket, and select the corresponding lockring. 11 T / 12 T EDCO Body +/- spacer 11T + 11 teeth “EDCO 11T” EDCO 12T + 12 teeth “EDCO 12T” 4.