Operation Manual

Tacx Trainer software Connected devices

- 1 - October 17, 2013

Connected devices

In the menu at the right hand side of the intro screen you will find the different devices. Here you can

see which devices are connected. You can also adjust the settings of the brake, the heart rate belt

and the steering frame. A green check mark means a proper connection.

USB Trainer Vortex Bushido Genius

Fortius/i-Flow

PAGE 1
Tacx Trainer software Connected devices Connected devices In the menu at the right hand side of the intro screen you will find the different devices. Here you can see which devices are connected. You can also adjust the settings of the brake, the heart rate belt and the steering frame. A green check mark means a proper connection.
PAGE 2
Tacx Trainer software Connected devices No connection If there is no connection, the device is displayed with a red cross. Make sure the USB cable is properly connected and the adaptor switch is on. If the connection does not work, it may be that the driver is not installed properly. Go to the Tacx website and check the Frequently Asked Questions about problems with the USB connection and the installation of the driver.
PAGE 3
Tacx Trainer software Connected devices Online update There are regular updates available for the Tacx Trainer software and trainers. We recommend you always use the latest version of the software. When your PC is connected to the internet and an update for the Tacx Trainer software, the handlebar computer or the brake is available, a red button appears near the devices in the menu at the right hand side of the intro screen. Push this button and follow the instructions of the installation program.