Operation Manual

OK
4 5
EN
DE
FR
NL
Operating while setting
Go back
Adjust setting
Leave settings menu
3 sec: on/of handle bar computer
Adjust setting
Next step
Operating while riding
Browse through display functions
3 sec: resetting training data
Change type of training and value
Opens function change “training type”
Confirm setting
Change type of training and value
Browse through display functions
When the Vortex is connected to the PC using the USB-ANT stick of the Upgrade PC, the keys are used to
operate the Tacx Trainer software.
Function keys
OK
OK
GENERAL OPERATING FUNCTIONS
Switching on the Vortex handle bar computer
Pressing the OK key switches on the handle bar computer.
Stand by
If the computer is not used for 3 minutes, it will go in stand by mode. You can switch the Vortex
handle bar computer back on again by starting to ride or simply by pressing any key.
Three ways of switching the Vortex handle bar computer off
• PresstheOK key for 3 seconds.
• After3minuteswithoutactivityorsignalfromthebrake,theVortexwillgoonstandby.
The training data will be saved up to the point you have arrived at.
• After30minutesonstandby,theVortexhandlebarcomputerwillswitchcompletelyoff
and your training data will be lost.
Resetting training data
When you are not riding, you can reset the training data by pressing Arrow left for 3 seconds.
Battery indicator
100% 66% 33% 0%
General operating functions