Instructions / Assembly

WALL MOUNT BRACKET

INSTALLATION INSTRUCTIONS

Installing the bracket for your Wall-Mounted Organizer

LEVEL

(not included)

TAPE MEASURE

DRILL

REQUIRED TOOLS

STEP 1.

Position bracket where

you would like to hang it. Make

a mark in 4 holes near the top,

nearest the left or right side of

the bracket. Then mark the both

of the 2 elongated holes at the

bottom of the bracket

STEP 2.

Drill a pilot hole for the

the spot you have marked. For dry

wall installation, insert an anchor.

For mounting into others surfaces,

make the pilot hole for the screw.

STEP 3.

Attach the bracket with

one screw in the upper edge of the

bracket, and then insert a screw at

one of the bottom elongated holes

to center and level the bracket. Then

secure both screws.

STEP 4. Continue and insert the

remaining 4 screws and secure

the bracket. You are now ready to

hang your organizer!

6 SCREWS

USE ANCHORS FOR

DRYWALL INSTALLATION

(not included)

PAGE 1
WALL MOUNT BRACKET INSTALLATION INSTRUCTIONS REQUIRED TOOLS Installing the bracket for your Wall-Mounted Organizer (not included) 6 SCREWS USE ANCHORS FOR DRYWALL INSTALLATION LEVEL DRILL (not included) TAPE MEASURE 1 2 STEP 1. Position bracket where you would like to hang it. Make a mark in 4 holes near the top, nearest the left or right side of the bracket. Then mark the both of the 2 elongated holes at the bottom of the bracket STEP 2. Drill a pilot hole for the the spot you have marked.