Use and Care Manual

To reset the machine to the default volumes of Espresso, Americano, Cappuccino
and Latte, press and hold the Espresso and Cappuccino buttons at the same time
for 5 seconds. The machine will return to its original default settings.
1. Refill the water tank with room temperature water.
2. Place an empty cup underneath the brew head, and aim the milk dispensing tube
into the empty cup.
3. Press either one button of the Espresso, Cappuccino, or Latte button. The
machine will start to pump water and make hot water.
4. Once the hot water comes out of the milk dispensing tube, all the buttons will
fully illuminate. Now the machine is ready to use again.
When the water tank run out of water, the Espresso, Cappuccino and Latte buttons
simultaneously flash in green for the water shortage warning.
Once the water shortage warning is triggered, please proceed as follows:
The machine will shut off automatically if no operation is selected after 15 minutes
on standby mode. All the buttons will turn off. To start the machine, press the
Power button to turn off then press Power button again to turn on.
19
HOW TO USE
RESETTING DEFAULT VOLUMES
WATER SHORTAGE WARNING
AUTO SHUT-OFF
hold for
5 sec.