PC Series [230V] POWER LINE CONDITIONERS FOR USE WITH AUDIO-VIDEO EQUIPMENT Instruction Manual Edition 03-2022
Introduction Thank you for purchasing this TAGA Harmony power line conditioner. The electricity network in our homes or workplaces is exposed to different interferences for instance electromagnetic interference (EMI) generated by appliances connected to the same network (refrigerators, air conditioners, computers etc.).
Contents 3 Safety Instructions 4 Controls and display 6 Hooking Up the Conditioner and Operation 8 Kit Content 12
Safety Instructions IMPORTANT READ THIS SECTION CAREFULLY BEFORE PROCEEDING! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the power outlet before cleaning.
Controls and Displays FLOOR-STANDING MODELS 2 7 6 4 1 5 Group III (5A max) UNSWITCHED L Group I (3A max) Group II (1A max) N L N SWITCHED N L N N L N L N L N 8 L L 9 Group IV (5A max) PC-5000 3 SHELF MODELS 8 2 3 5 4 7 1 9 6 Note! The drawings are only for the reference. The appearance, certain design and marking elements, and a number of Power Sockets may vary on model.
Controls and Displays 1. Power Switch of the Switched Power Sockets [ON (I) and OFF (0)] 2. Phase LED Indicator 3. Voltage Indicator Display 4. Power Cable Input and Fuse Box 5. Fuse Box Blown fuses should be only exchanged for the same types as indicated on the rear conditioner panel above the Power Cable Input and above the Fuse Box. The Power Cable should be disconnected! 6. Ground Screw 7. Polarity Switch 8. Switched Power Sockets Group I recommended for digital equipment.
N N L N N N N L L L L L L L N N N L N N L N N L N N L N L N L N L N L N N L L L L N L N L N L L N N L N N L N N L N N L Power cable Hooking Up the Conditioner and Operation Digital devices e.g. DAC, Music Streamer, Media Player, BT receiver etc. L L PC-5000 PC-5000 Group I Group II Power cable L Group II (1A max) Group II (1A max) L Group IV (5A max) Group IV (5A max) Sound sources e.g. CD / DVD / Blu-ray Player, Turntable, Radio Tuner.
Hooking Up the Conditioner and Operation Phase Detection A. Make sure that the Polarity Switch is set on 1 (default). It determines the polarity in the female contacts in the Power Sockets: • floor-standing models - according to the L and N marking on the top panel. • shelf models - if the L and N marking is not provided, as shown in the figure below (view on the rear panel from the back). B. Without connecting any external equipment plug the Power Cable to the conditioner and into the electrical outlet.
Hooking Up the Conditioner and Operation RECOMMENDATIONS FOR CONNECTING EQUIPMENT TO THE POWER SOCKETS SWITCHED POWER SOCKETS active with the Power Switch in position 1 (ON) UNSWITCHED POWER SOCKETS always active when connected to an electrical outlet Power socket group GROUP I low-power inductance filtering GROUP II low-power inductance filtering, isolated by the power transformer GROUP III high-power inductance filtering GROUP IV high-power inductance filtering Recommended devices for the group Di
Hooking Up the Conditioner and Operation IMPORTANT SAFETY REMARKS! • This unit requires a single-phase 3-conductor electrical outlet. • We recommend to use Schuko plugs in all power cables. • Make sure not to overload the power line conditioner and individual groups of Power Sockets. Power load for each group of Power Sockets: the total maximum power consumption for all connected devices to a given group should not exceed the maximum power load for this group.
We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Kit Content: Power Line Conditioner Power Cable Instruction Manual 1EA 1EA 1EA EU declaration of conformity Your product is marked with the symbol shown on the left.
Notes
Notes
